web analytics
Expansion gap in dome - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Forum Issues Update

Things are progressing in getting things back in order on the Forum! User avatars should be showing up. Attachment and inline images are in the process of being uploaded. We are still looking for a migration path for the Photoplog gallery. Thank you for your patience!
See more
See less

Expansion gap in dome

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Expansion gap in dome

    Is a 1/4 inch gap in the front part pf the dome acceptable for heat expansion.

    Dome made up of four pieces, sort of tounge and grooved with a good seal where the pieces meet, but front edge has a 1/4 inch gap. Mason said this was OK and was needed for heat expansion.

    Should I be worried?

  • #2
    You'll be fine. The general rule with the precast domes (make sure that you all buy from Forno Bravo ) is that you put a 2" thick band of refractory mortar outside of the dome seams, not inside it. That keeps your heat, air and smoke inside the oven, and allows the dome pieces to expand and contract without pushing on each other or the mortar.

    James
    Pizza Ovens
    Outdoor Fireplaces

    Comment

    Working...
    X