web analytics
Oven stand dimensions - Forno Bravo Forum: The Wood-Fired Oven Community



New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Oven stand dimensions

  • Filter
  • Time
  • Show
Clear All
new posts

  • Oven stand dimensions

    Okay, so here's a dumb question: I am installing a Casa2G100 oven and it calls for a stand 54" x 61". Using 8x8x16 or 8x8x8 inch blocks, how do I achieve those dimensions? Thanks!

  • #2
    Re: Oven stand dimensions

    Make the joints wider.


    • #3
      Re: Oven stand dimensions

      If the joints get really wide, you can easily cut CMUs -- using a masonry blade on either a skill saw or grinder. It's noisy and dusty, but it isn't difficult.
      Pizza Ovens
      Outdoor Fireplaces


      • #4
        Re: Oven stand dimensions

        You could make it 56 X 64 and have a slightly larger stand ( actually less than that because the blocks measure about 3/8" less than stated measurements) by dry stacking them and filling the cores.


        • #5
          Re: Oven stand dimensions

          Thanks, guys! I appreciate the help.