web analytics
casting dome ???? - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

casting dome ????

  • Filter
  • Time
  • Show
Clear All
new posts

  • casting dome ????

    I would like to know if I dont want to use firebricks at all in the oven dome can I cast it in one piece and what material should I use for casting so it can retain heat and reach up to the right heating temperature without cracking using a gas burner ?

  • #2
    Re: casting dome ????

    do a forum search for "casting dome" you will find a ton of info. good luck to you, and please keep us posted on your build with pictures


    • #3
      Re: casting dome ????

      reach up to the right heating temperature without cracking using a gas burner ?
      Gas burners aren't recommended for home ovens: the gas can accumulate in the closed dome, with a risk of explosion. Commercial gas burners are used in a commercial environment, and have many safety controls.
      My geodesic oven project: part 1, part 2