web analytics
Chimney Construction question - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Chimney Construction question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chimney Construction question

    Hi again,

    I got the 4 dome pieces aligned correctly, and now had a question about the 2 chimney pieces.

    Do I put refrax between each other and the dome?

    Also the piece with the 2 bumps. Do the bumps go in front or the back?

    Steve

  • #2
    Re: Chimney Construction question

    Hi Steve,

    You are making good progress. The vent piece with the rectangular opening goes on first, with the bumps to the front and the front of the vent lined up with the front (vent area walls) of the oven. I am attaching a couple of photos.

    Yes, used Refmix between each layer (oven to vent, vent to round chimney adapter), and use a little Refmix on the outside of the seams to ensure that you have an airtight seal.

    Keep going!
    James
    Attached Files
    Pizza Ovens
    Outdoor Fireplaces

    Comment

    Working...
    X