web analytics
Trouble aligning the oven pieces - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Trouble aligning the oven pieces

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Trouble aligning the oven pieces

    I have a Casa100 I'm trying to install, and I had a lot of trouble getting the oven pieces to line up. How exact is the fit supposed to be? The sides have a gap of about 1/3" at the bottom.

    One problem is the FB board underneath the oven got compressed as I shifted the pieces around trying to get them to line up.

  • #2
    Re: Trouble aligning the oven pieces

    Hello stchang,

    You should be able to get the seams of the dome of the Casa100 to line up nicely, leaving you a 1/4" gap between the floor and the dome. That gap is for expansion and contraction.

    One way of knowing that the dome is set up correctly is that you can see that it is sitting flush on the FB Board (though the compression in the board might be making it difficult to see that line up).

    Can you flip the board over? If not, and it is a problem, contact us at the office and we can replace the board.

    Let me know how it goes.
    James
    Pizza Ovens
    Outdoor Fireplaces

    Comment

    Working...
    X