web analytics
Casa 100 Dome Help - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Casa 100 Dome Help

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Casa 100 Dome Help

    Okay, Casa 100 dome is up and have some questions. Looking from the inside the seams are pretty tight and line up okay. There is one section where the pieces all meet that is a bit lower. Additionally, there is a 1/4" to 1/2' inch hole right in the center of the dome. Is this okay since the mortar will cover it or should I try to correct it because possibly I have the sections in the incorrect position?

    The dome pieces are not perfectly molded so it seems there is no way to make the oven match up perfectly. It seems like I am really close to mortaring the dome and proceeding with the rest of the install. I appreciate anyone's input.

  • #2
    Re: Casa 100 Dome Help

    Ciao Lou,

    The dome pieces should line up pretty nicely. If you check that each dome piece is resting flush on the hearth, and each dome piece is set at the same upward angle, the seams should be pretty consistent and tight.

    Of course it isn't a Lexus. :-)

    Let me know if you can get it tighter to where it looks good.
    James
    Pizza Ovens
    Outdoor Fireplaces

    Comment


    • #3
      Re: Casa 100 Dome Help

      What about the hole in the middle? Should that not be there? It seems there is no way to avoid it unless I have the two back sections in the wrong spot.

      Comment


      • #4
        Re: Casa 100 Dome Help

        There should not be a hole. It's possible you don't have the pieces set up right. The rear dome pieces have a definite top and bottom.

        James
        Pizza Ovens
        Outdoor Fireplaces

        Comment


        • #5
          Re: Casa 100 Dome Help

          Could I have the two pieces crisscrossed? Is there an eay way to tell which piece goes where and what is top and bottom. I truly believe I have the top and bottoms set up properly. I could send you pictures to your private email if that would help.

          Comment


          • #6
            Re: Casa 100 Dome Help

            Lou,
            Tammy or Peter will give you a call, to make sure we get this right.
            James
            Pizza Ovens
            Outdoor Fireplaces

            Comment


            • #7
              Re: Casa 100 Dome Help

              Thanks for all your assistance. Without this forum probably never would have a oven installed.

              Comment

              Working...
              X