web analytics
New Oven- Base Plans - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

New Oven- Base Plans

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • New Oven- Base Plans

    Hello, I am new to this forum but in the middle of a build. My oven will be 48" circular oven but the base of the oven is my problem. My wife does not like the traditional Block base construction and would like to build it on Granite Posts. The full hearth base will be suspended on these 4 posts on each of the corners it will hold a 6' x 7' hearth by 6"Thick. I am concerned with the span of this slab and its ability to hold, what I estimate is about 1500lbs without collapsing. There will be no middle support just the 4 piers in the ground. I have concreted these posts in the ground using SonoTubes at 3' Depth now I need to build the forms for the hearth. I know that I will be using 1/2 re-bar for slab support grid but not sure if I should be worried about its ability to hold this much weight. Does anyone have any ideas or information? There are no examples on the internet for such a design, So either I am breaking new ground or its just a ridiculous idea!!! Any info or direction will be appreciated
Working...
X