web analytics
Reconditioning Refractory Oven - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Reconditioning Refractory Oven

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Reconditioning Refractory Oven

    I have had my refractory WFO for about 11 years now and the inside is starting to show signs of cracking and the surface is very uneven and pitted.

    Is it possible to recondition the inside of the WFO and get it smooth and like it was when it was installed. Or, is this perhaps a natural part of the ageing process for a WFO and should just leave it as it is. It still seems to cook OK?
    / Rossco

  • #2
    Re: Reconditioning Refractory Oven

    Gudday
    Ditto with what Mick said
    but if you just can't leave it alone just one experimental patch better on the side of the oven you put you fire and watch it for a while. If it falls of no damage done

    Regards Dave
    Measure twice
    Cut once
    Fit in position with largest hammer

    My Build
    http://www.fornobravo.com/forum/f51/...ild-14444.html
    My Door
    http://www.fornobravo.com/forum/f28/...ock-17190.html

    Comment

    Working...
    X