web analytics
Reconditioning Refractory Oven - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Reconditioning Refractory Oven

  • Filter
  • Time
  • Show
Clear All
new posts

  • Reconditioning Refractory Oven

    I have had my refractory WFO for about 11 years now and the inside is starting to show signs of cracking and the surface is very uneven and pitted.

    Is it possible to recondition the inside of the WFO and get it smooth and like it was when it was installed. Or, is this perhaps a natural part of the ageing process for a WFO and should just leave it as it is. It still seems to cook OK?
    / Rossco

  • #2
    Re: Reconditioning Refractory Oven

    Ditto with what Mick said
    but if you just can't leave it alone just one experimental patch better on the side of the oven you put you fire and watch it for a while. If it falls of no damage done

    Regards Dave
    Measure twice
    Cut once
    Fit in position with largest hammer

    My Build
    My Door