web analytics
Stucco on my 2G90, and then a roof later on? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 3 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 3 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 3 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Stucco on my 2G90, and then a roof later on?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Stucco on my 2G90, and then a roof later on?

    I'm in the process of putting together my Casa2G90, and I haven't quite made up my mind what the final enclosure is going to look like. If I decide to go with a stucco finish, and then change my mind later and decide to enclose it using metal studs and a roof- is that going to cause problems?


  • #2
    Re: Stucco on my 2G90, and then a roof later on?

    It shouldn't, as long as you have enough room in the slab to accommodate that.


    • #3
      Re: Stucco on my 2G90, and then a roof later on?

      Remember that stucco's are at best "water resistant" not "water proof".

      Since you are in Everett, Washington, I would plan to tarp it during the rainy season.


      • #4
        Re: Stucco on my 2G90, and then a roof later on?

        That's a good point about the stucco- maybe I'll go with a roofed enclosure from the start. I still have a couple more months of dry season left thankfully!


        • #5
          Re: Stucco on my 2G90, and then a roof later on?

          The stucco should cause no problems with building an enclosure around the oven later and roofing it. I am going to do that for I find I get a wet slab during wet periods. Keeping water OFF of the oven is the simplest solution. You can waterproof the stucco or paint it to help but... I doubt that in Everett you can keep it dry unless you put a roof over it!


          • #6
            Re: Stucco on my 2G90, and then a roof later on?

            You can also think about finishing it in some kind of stone? but I think Stucco will work just great. During those times of wet weather you can do a mini cure and burn up some of the moisture that may surface inside the oven. Good Luck and have fun!!

            Maria =-)