web analytics
Voids in the Dome? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Voids in the Dome?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Voids in the Dome?

    Hey All,

    Just started my Casa2G100 install this morning, and I'm having trouble getting the dome to fit together. Seems too loose, and has voids that I can see daylight through.

    If I had to guess, I'd say the floor tiles are too big. There's absolutely no void between the tiles and the dome.

    If I jam the cap on, the voids are more than half an inch.

    If I leave the cap off, I can get them to less than half an inch.

    Should I shave the dome? Shave the cap? Shave the floor tiles?

    Thanks for any insight you can give.
    Attached Files

  • #2
    Re: Voids in the Dome?

    You shouldn't be asking us, you should be contacting FB directly.
    Kindled with zeal and fired with passion.


    • #3
      Re: Voids in the Dome?

      I called them yesterday. The person helping me needed to talk to the manager, and swore she would call me back in an hour.

      Have gotten nothing but radio silence since then.

      I sure don't want to screw up a $3000 project.


      • #4
        Re: Voids in the Dome?

        I have a different Casa model but those gaps look well within norms. The gaps are what you cover with the refractory cement. I don't see anything regarding the fit to be concerned about.

        However, while the inside of the dome appears clean, it appears you have soot on some of the exterior seams. When you cement the pieces the cement should be CLEAN with no dust or soot so that you get a good bond.


        • #5
          Re: Voids in the Dome?

          Thanks for the advice. I mortared it together this morning and everything seems ok.