web analytics
Re-setting floor tiles Giardino 70 - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Re-setting floor tiles Giardino 70

  • Filter
  • Time
  • Show
Clear All
new posts

  • Re-setting floor tiles Giardino 70

    Hello all,

    Yesterday, I used a pallet lift to get the dome of my Giardino 70 atop the stand and a friend and wrestled it into place on the FB blanket base/floor tiles. In so doing, several tiles were knocked out of alignment and level. Anyone here had to re-set floor tiles to level with the oven dome in place--or, alternately, jacked up the dome somehow to do this job? If so, any tips greatly appreciated.


  • #2
    Re: Re-setting floor tiles Giardino 70


    I just completed a similar operation on my oven. Assuming you set the floor tiles on a bed of sand, just lift out the ones you want to adjust (trowel or strong BBQ spatula works well here), put a bit more sand under them, smooth it a bit then tamp them back to level like you did before the dome was on. You can still get a 3 foot level through the opening to check level front-to-rear, and a shorter one to check side-to-side. I didn't have to remove all of my floor tiles, just one row, but you could re-set them all with the same process.

    Last edited by JamieC; 06-12-2012, 08:21 PM. Reason: typo