web analytics
Starting Over - Can I save the granite? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Starting Over - Can I save the granite?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Starting Over - Can I save the granite?

    I am installing a new Premio2G100 to replace a competitive modular oven that I installed previously without floor heat stopping material. The previous oven worked well but did not hold temperature for very long after firing. The 6" of concrete below just sucked the heat out of it. My mistake...no one else to blame.

    I am installing a larger Forno Bravo oven where the previous one sat and would like to save the granite top. My plan is to fill the cut out of the previous with concrete to the level of the granite, then place the heat stop board over top of both the concrete and the granite where the new oven is larger than the previous.

    Are there any master builders out there that foresee a problem with doing this?

    Thanks for the help! Photos of the installation can be seen at:

    MobileMe Gallery