web analytics
Giordino70 - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less


  • Filter
  • Time
  • Show
Clear All
new posts

  • Giordino70


    I'm getting the Giardino 70 kit and have a few questions.
    Im looking at the installation manual and on page 19 where they show the mesh on the dome.Is it fastened to the base of the oven and to the arch at the opening with some sort of screws? If so,is it ok to drill into it with a concrete bit and what i imagine would be rawl plugs for the screws?

  • #2
    Re: Giordino70

    How did everything work out for you? I saw your posts, I just ordered my giardino 70 yesterday. I Am surprised no one responded.


    • #3
      Re: Giordino70

      Everything worked out great. You will love your giardino


      • #4
        Re: Giordino70

        So did you end up screwing the wire mesh into the oven, or did you just let it hang around the insulation?


        • #5
          Re: Giordino70

          Yes. I did. I put a minimum amount of screws to hold the mesh to keep the shape I wanted. I used short tapcons. Just long enough to hold mesh and fender washer


          • #6
            Re: Giordino70

            I just did that on the front of the oven.


            • #7
              Re: Giordino70

              Thanks, I am sure I'll need to do the same thing.

              Did you have a picture of your finished oven? I would love to see it! There are not a lot of Giardino-70 pics on here.


              • #8
                Re: Giordino70

                Send me your e mail address and i can e mail you some