web analytics
Giordino70 - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Giordino70

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Giordino70

    Hi,

    I'm getting the Giardino 70 kit and have a few questions.
    Im looking at the installation manual and on page 19 where they show the mesh on the dome.Is it fastened to the base of the oven and to the arch at the opening with some sort of screws? If so,is it ok to drill into it with a concrete bit and what i imagine would be rawl plugs for the screws?

  • #2
    Re: Giordino70

    How did everything work out for you? I saw your posts, I just ordered my giardino 70 yesterday. I Am surprised no one responded.

    Comment


    • #3
      Re: Giordino70

      Everything worked out great. You will love your giardino

      Comment


      • #4
        Re: Giordino70

        So did you end up screwing the wire mesh into the oven, or did you just let it hang around the insulation?

        Comment


        • #5
          Re: Giordino70

          Yes. I did. I put a minimum amount of screws to hold the mesh to keep the shape I wanted. I used short tapcons. Just long enough to hold mesh and fender washer

          Comment


          • #6
            Re: Giordino70

            I just did that on the front of the oven.

            Comment


            • #7
              Re: Giordino70

              Thanks, I am sure I'll need to do the same thing.

              Did you have a picture of your finished oven? I would love to see it! There are not a lot of Giardino-70 pics on here.

              Comment


              • #8
                Re: Giordino70

                Send me your e mail address and i can e mail you some

                Comment

                Working...
                X