web analytics
Wet Insulating Blanket - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Wet Insulating Blanket

  • Filter
  • Time
  • Show
Clear All
new posts

  • Wet Insulating Blanket

    I am in the late stages of a Casa 2G100 build. My tarp leaked and my insulating blanket got wet. I currently have 3 layers covered in chicken wire awaiting stucco. Hard to tell exactly how wet it got. It wasn't thoroughly soaked, but took on a bunch of water.

    Do I have to replace it? How can I tell if it's OK?


  • #2
    Re: Wet Insulating Blanket

    If its ceramic blanket itll be fine, maybe you could fire up the oven to dry it?
    Fire it on low, not high.
    The English language was invented by people who couldnt spell.

    My Build.



    • #3
      Re: Wet Insulating Blanket

      I'd try to let it dry out before you cover it as best as possible.
      My oven (for now):


      • #4
        Re: Wet Insulating Blanket

        Thanks for the reply. Yes it is a ceramic insulating blanket.
        Last edited by DC8702; 03-15-2011, 03:57 PM.


        • #5
          Re: Wet Insulating Blanket


          Brickie is correct, just fire the oven on low for a few hours to get the heat through the refractory - just think of this being an extended low temperature cure. The just be sure not to have anything on top of the insulation so that the steam has a free flow You will want to do this on a clear day with low humidity (a relative term on the East Coast) to maximize your efforts.

          Best o luck
          Jen-Aire 5 burner propane grill/Char Broil Smoker

          Follow my build Chris' WFO