web analytics
Still unclear about dome - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Still unclear about dome

  • Filter
  • Time
  • Show
Clear All
new posts

  • Still unclear about dome

    Hey all, Steve from Nantucket here, proud owner of a Casa2g 110. I've read through many postings about finishing the dome, curing, etc. (and many looks at the FB CD as well) and I confess to remaining unclear on on a couple of things. The dome is complete and I have parged over the joints. Now...
    1) Do I parge over the entire dome surface? I have enough FB mortar mix to do so. Is this a "it's your choice" scenario?
    2) The oven is cured prior to applying the insulation. __YES __NO
    Those are my couple of things. Thanks, may your ovens always be hot!

  • #2
    Re: Still unclear about dome

    Congrats on your new purchase....that's a nice big oven.... You have a lifetime of tinkering ahead. Will defer to the FB people on your ??? Is it for your personal use or commercial use?
    Our Facebook Page:http://www.facebook.com/pages/Stoneh...60738907277443


    • #3
      Re: Still unclear about dome

      Thanks Iwood. I've talked to a couple of friends and found additional threads about this on the FB forum and have come up with the very clear answer that one can choose to parge or not parge, that one can cure prior to insulation or after insulation.... the most common thread is about the curing, following the schedule and taking your time with it, so there you have it. What I've decided to do is keep the parged joints slightly damp for a week in order to keep the ref. mortar hydrated, a tip from a mason on this forum. This is working quite well and cracks are at a minimum. This upcoming weekend I'll loosely lay the insulation on the dome and start the curing. This oven is mounted on a trailer, which I'll be using for both business and pleasure. This idea has been fermenting since '08, when my daughter and I built an Alan Scott oven in the backyard. Just another crazy scheme my wife has too endure....


      • #4
        Re: Still unclear about dome

        Hi Steve,

        You do not need to cover the entire dome with additional mortar. It is an option, but it really isn't necessary. Your Casa2G oven has more than enough mass in the dome for tons of pizza making, bread baking and roasting. Make sure your joints are nicely sealed and the dome pieces are nice and tight.

        You also don't really need to cure the oven without the insulation, but if you can do it that way, it's fine. The moisture just slowly bakes out.

        So, you are doing the right things, and take your time curing the oven.

        Lots to look forward to -- enjoy!

        Pizza Ovens
        Outdoor Fireplaces


        • #5
          Re: Still unclear about dome

          Thanks for the reply James. What you say is pretty much how I have decided to proceed. There is one comment, at least one, from someone who had the brilliant idea of actually cooking in the oven with the curing fires! Hey, why not? Looking to forward to that and lots more... Laissez les bon temps rouler!!!