web analytics
Casa2G90 - Getting Ready, Stucco Questions - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Casa2G90 - Getting Ready, Stucco Questions

  • Filter
  • Time
  • Show
Clear All
new posts

  • Casa2G90 - Getting Ready, Stucco Questions

    The freight company will be dropping the oven kit off on Monday and I am gearing up to do assembly. My base (pictured) was finished last week.

    I understand that water is an enemy until the final coat of stucco goes on, so should I'm planning on tarping if rain interrupts the build. I've read through the instructions several times and I think I've got the assembly down. I'm planning to finish it as a gray igloo.

    I'm new to stucco, so is there a primer online worth reading? Products worth recommending? I hear there is a partial vinyl stucco that I should use as the final coat. How long should I wait between coats, how many coats, etc? Any and all stucco advice is appreciated!
    Attached Files

  • #2
    Re: Casa2G90 - Getting Ready, Stucco Questions

    What we did was after the Ceramic Insulation we wrapped our igloo in chicken wire and tie wired it all together to keep the nice shape. Then we coated it with poormans mortar...... let it dry one day. then next day I use "STO" Stucco then after it dried I put another coat on it. you can look at my build if you want to



    • #3
      Re: Casa2G90 - Getting Ready, Stucco Questions

      Hi Chris, I am getting a Casa 2g90 in the Spring, this winter I will build the stand for it. Can you tell me the exact width and lenght of your 2g90 as it sets on the stand, I am also going to have the brick arch. will this effect the length ? I don't want any over hange. .... Doug
      email address driach@fuse.net