web analytics
Metal stand dimensions for Ristorante 130 - Forno Bravo Forum: The Wood-Fired Oven Community



New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Metal stand dimensions for Ristorante 130

  • Filter
  • Time
  • Show
Clear All
new posts

  • Metal stand dimensions for Ristorante 130

    (also posted in Commercial Ovens)

    We're having a Ristorante 130 installed in our restaurant. (I bought one of the last ones.) We need a metal stand and think that we've found somebody local who can make one, but I'm not sure of the dimensions.

    Our contractor says that it has to support 3,000 lbs. He also came up with dimensions of 83x76 and 38" high.

    I want the stand to be adequate, of course, but also don't want it to take up unnecessary space. I got a slightly different suggestion for dimensions from Les on the Commercial forum, a little smaller. Does anybody have the dimensions of the original 130 stand, or for the Modena 140 (which seems to be about the same size)?