web analytics
another firebrick question - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

another firebrick question

  • Filter
  • Time
  • Show
Clear All
new posts

  • another firebrick question

    after searching the area i've found a yard that carries firebrick....after a few phone calls..one to the supplier and then one to the manufacturer...i have found that these bricks are a mediun duty..and have been told that low duty bricks are non existant in this area..the content of the available bricks is 33.9% alumina and 59.9% silica...i guess my simple question is..are these bricks satisfactory for use in building the oven..any input will be greatly appreciated..thanks

  • #2
    I could only find medium duty for mine (I found these bricks).

    My oven has only really been up to full temp once, but they worked great and retained heat well.

    James has this brick primer on the site. It says, "There is also a medium duty firebrick designed for higher heat. We recommend the low duty firebrick, but medium duty is acceptable."

    All-in-all, better to have a medium duty firebrick oven than no oven at all.

    My Oven Thread:


    • #3
      thanks for the reply..as a matter of fact..over the weekend i was searching the internet for firebrick and came accross the bricks that you used..the thing i really like about the bricks that i've found here is that they are very uniform in size and have clean..crisp..square corners..and btw..i've followed the building of your oven..very impressive..my compliments