If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Forum Issues Update
We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
My neighbor has 2" angle iron, but it is 1/4" thick. This is a freebee. The plans call for 3/8". Will using the 1/4" compromise my oven? Would using more rebar in the front of the slab make up the difference?
Member WFOAMBA Wood Fired Oven Amatueur Masons Builders America