web analytics
Floor Dimensions Premio - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Floor Dimensions Premio

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Floor Dimensions Premio

    I;m getting ready to set the floor to the Premio 120, I found the center and am going to set that tile now. When I set the other floor tile rather than pack them tight I'm going to strike a circle with a radius of 23.51" and set the tiles to that line. Is this correct? Or do I pack them tight? My instructions are in itallian and I don't undertand the text. TIA

  • #2
    I belive you could follow the directions that James has put together for the Premio at this link. It is an Adobe Acrobat file. If you need a reader to open the file do a google search on Adobe. Adobe has a free download reader.

    http://www.fornobravo.com/PDF/Premio_Installation.pdf

    So I took a look at what was written and it does not address your question specifically. It would seem prudent to do a dry run without the mortar to determine if it is best to lay the floor tile with the recommended diameter and then fill in the voids of the floor or to tight pack the tile. In either case you need to make sure that the dome will fit around the floor tile. I have a suspicion that if you tight pack the floor (you would still have some gaps but they will fill in with ash over time) you may have a gap between the floor and the dome/vent assembly.
    Last edited by jengineer; 06-21-2006, 08:43 AM.

    Comment

    Working...
    X