web analytics
Fire blankets for insulation - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Fire blankets for insulation

  • Filter
  • Time
  • Show
Clear All
new posts

  • Fire blankets for insulation

    Hi there,
    I'm just about ready to insulate the dome....finally!
    I've been pricing up ceramic blanket and its very expensive. I've been asking for advice on another forum(green) i frequent, and somebody mentioned using old reclaimed non asbestos fire blankets as they have a very very low thermal conductivity and will be very cheap...a couple of quid each. Do you think these would work under 4/5" vermiculite/ cement mix.


  • #2
    Re: Fire blankets for insulation

    Now there's a question we've never seen before. What were they used for? Are you sure they're asbestos free?

    Anybody know about these?
    My geodesic oven project: part 1, part 2


    • #3
      Re: Fire blankets for insulation

      Hi Dmun,
      Over here in the uk, fire blankets are used for mainly kitchens(deep fat fryers) apparently they were of asbestos construction, but nowadays they're of ceramic fibre(glass) construction. I use a small version at work when i'm soldering copper, and i dont mark paintwork after a few mins @ 450 degs.



      • #4
        Re: Fire blankets for insulation

        My only thoughts are that the fire balnket is designed to stop oxygen getting to a fire to suffocate the fire and put it out. I think because the blankets are ment to be thin and flexable that would mean it would have to have a fairly tight weave.

        M understanding is that the idea of the ceramic insulation is that it is 'fluffy' allowing tiny air pockets to be created within the blanket which don't move around or can transfer heat easily to each other.

        I think that the fire blankets would work but you would need to find alot of them to get enough layers of blankets.

        If you are after a cheaper alternative then I would suggest the vermiculite/perlite types.

        Real men cook with fire
        My Oven and Fireplace Build


        • #5
          Re: Fire blankets for insulation

          Me again,
          I been searching the net for brochure information of ceramic fibre and came across this :

          ******x 3180 Blanket is a needled blanket made from our CeraTex ceramic fiber. The blanket is ightweight, flexible, and available in a wide variety of thicknesses, widths and densities.

          CeraTex 3180 Blanket resists temperature as high as 2300. This material is lightweight and has very low thermal conductivity, excellent handling strength, low heat storage, thermal shock resistance and corrosion resistance (commonly used acid and alkali). It also provides excellent sound absorption and excellent fire protection.

          .................................................. ...................

          I also tried wikipedia, and blanket is used for protection of equipment and not for insulating as i thought.

          Most fire blankets are appox 1mx1m in size so i would probably need 2-3 .......2 each = 6 total then insulate with vermiculite/cement.

          I've done my bit for mother earth as all my materials have been reclaimed......even the insulation now!!

          I keep you all posted folks.