web analytics
Positioning Oven Dome on Slab - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Positioning Oven Dome on Slab

  • Filter
  • Time
  • Show
Clear All
new posts

  • Positioning Oven Dome on Slab

    I am trying to get ideas on how best to position the oven (dome) base on the stand. I've seen some threads where folks recommend having as much space as possible in front of the oven landing as a workspace. How much is enough? How much is too much? I am putting in a cantilevered front which give me a shelf about 9 inches in front of my block stand and if I position my oven with 5-6 inches to spare in the back it will give me over 18 inches in front of the oven landing. Is that too much, too long a distance to work inside the oven moving coals around and working with the peel?

  • #2
    Re: Positioning Oven Dome on Slab

    It's a trade off between work space and accessibility.

    Another option is to come off tangent to the dome and then continue with a rectangular work surface. See attached photo.
    Attached Files


    • #3
      Re: Positioning Oven Dome on Slab

      Thanks for the answer. That's a cool looking oven!