web analytics
Adjusting your HFTools tile saw - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Adjusting your HFTools tile saw

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Adjusting your HFTools tile saw

    As evidence by so many posts on this site, the Harbor Freight tools 10" tile saw is a workhorse and no one should build without one. But they are notoriously misaligned to the scale on the table. Because how to adjust for this isn't included in the instructions AND it isn't entirely obvious, I thought it might be helpful to post the steps to square and align the blade to the table.

    They are attached (zoom to read text).

    Jim

  • #2
    Re: Adjusting your HFTools tile saw

    I gave up on scale fixtures years ago.. But good FYI post.. I'll have to tweak mine now..
    Shay - Centerville, MN

    My Outdoor Kitchen/Pompeii WFO Build...

    Comment


    • #3
      Re: Adjusting your HFTools tile saw

      From the illustration i see that they've gotten rid of that mostly useless guard over the main (left) table guide rail. Now if only they'd improve that wimpy pump.
      My geodesic oven project: part 1, part 2

      Comment


      • #4
        Re: Adjusting your HFTools tile saw

        So I'm not the only one that thinks that pump is junk? If my side tray of water gets too low the pump stops working and I have to A) fill my container and then B) Unhook the hose from the pump till it starts flowing again then C) shut off the saw and finally D) put the hose back in the pump.. ack..

        But.. for the price.. I ain't complainin...
        Shay - Centerville, MN

        My Outdoor Kitchen/Pompeii WFO Build...

        Comment

        Working...
        X