web analytics
silica content in brick and mortar - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

silica content in brick and mortar

  • Filter
  • Time
  • Show
Clear All
new posts

  • silica content in brick and mortar

    I have become quite interested in building one of these ovens, and have been pricing out materials. While pricing out firebrick, I explained to him what I was doing and he warned me about the high silica content of the brick being a hazzard to cook food on, and told me that commercial refractory cement has atleast twelve different oxidants in it, and would not recemmend using any of it, and to try and find low silica bricks and special mortar. Browsing this site and the net I have found no mention of these concerns and am wondering if he is just being over cautious or whether there is some legitimacy to this?

  • #2
    Re: silica content in brick and mortar

    The concern with silica is the crystallization that takes place at much higher temperatures, about 1100 C I think, way higher than we fire to. It's quite safe for our application as far as I know.
    Kindled with zeal and fired with passion.


    • #3
      Re: silica content in brick and mortar

      crystiline silica is an air borne hazard

      ALL bricks and cement contain it, it's a basic component of sand etc. as far as i can see unless you plan to fire the bricks at over 1000c repeatedly and scrape off the tiny silica crystals and eat a few grams of it every day for years the worst you will get is a very painful kidney stone
      Urolithiasis in a patient ingesting pure silica: a...[Scan Electron Microsc. 1986] - PubMed Result
      wear a dust mask when cutting the bricks, but most importantly wear steel caps, saftey glasses, look after your back and use power tools with care while building a pizza oven - these are the real dangers of building one.