If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Forno Bravo Forum Thread Message
Hello, Forno Bravo Community Forum Members!
The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.
Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.
We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.
Thank you for all of your patience and continued support.
Fireclay is indeed an industrial term. You might be able to find it at companies who sell pottery and kiln supplies; at least you can where I am. You want the finest "screen" they have; ie, the smallest, finest particles.
"Made are tools, and born are hands"--William Blake, 1757-1827
Thanks for the quick reply Wiley and CanuckJim.
I did find some at Seattle Pottery. $10 for 50lbs. Not sure if that is expensive or not, but one more item off the list and I'm ready when I finish off the insulation layer of my hearth.
Re: Where to purchase Castable Refractory cement in Seattle?
Is there anywhere in the Seattle-Bellevue-Renton-Redmond area that carries a castable refractory cement (mortar)?
(I need to fill a fairly thick area, up to 2" thick, maybe 24" wide x 10" high, and I don't want it to crack, so ordinary refractory won't work. It's in a hard-to reach place, filling a gap inside a two-layer, partly-rusted firebox, so I can't use firebrick. I've thought of using a high-temp cement like a Class G/ MSR HSR, but am not sure if I can buy 10-25 lbs here.)
I'd like to get this in the next day or two if possible, without paying too much. So I don't want to wait for shipping from an online place.
Or is there a reliable recipe materials I can buy in stores here? (I've seen several recipes online that look pretty dubious to me.)