web analytics
best method for perlite insulation on dome - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

best method for perlite insulation on dome

  • Filter
  • Time
  • Show
Clear All
new posts

  • best method for perlite insulation on dome

    what is the best way to finish off a dome that has 3-6" of ceramic fibre blanket insulation. I want to use 1-2" perlcrete and then a skim of external plaster/stucco and already have the fibre blanket held on place with a well secured chicken wire mesh that is streched tightly across the dome.

    From the FB instructions I can see that a second mesh layer is created and the perlite mix is pushed through this. Is this absolutely necesary, or will it be easy to apply the perlite mix onto the blanket?


  • #2
    Re: best method for perlite insulation on dome

    Hi Brad,
    you certainly have a heap of insulation!.
    I only put on a 1" super wool blanket and then 3 x 1" layers of vermiculite cement, See:


    permalink #8.
    I put over the blanket, some chicken wire and then managed to lather it all with vermiculite cement. This is quite difficult to work and I added a little fireclay to make it stickier. I started at the very top and worked my way down and around ensuring that I always trowelled the mix in an upwards direction. You will find it out when you try out. I have given all my experiences and tips in my build postings.

    Prevention is better than cure, - do it right the first time!

    The more I learn, the more I realise how little I know

    Neill’s Pompeiii #1
    Neill’s kitchen underway


    • #3
      Re: best method for perlite insulation on dome

      It is easier to apply the mixture from the bottom up, so you have something for it to sit on. The more cement,lime or fireclay that you use, the more you will reduce its insulating value. A 10:1 vermiculite/cement is sufficient to hold the mix in place and it will set up quite firm so you can stucco over it easily.
      Kindled with zeal and fired with passion.