web analytics
12"x12" Fire Brick - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

12"x12" Fire Brick

  • Filter
  • Time
  • Show
Clear All
new posts

  • 12"x12" Fire Brick

    I can get a hold of 12"x12" fire brick that is 2" thick. But the brick is high duty. Would this work for the floor of the oven? Being thinner than a standard brick whould mean less mass to heat. Right? Does anyone have any experience or thoughts on this?


  • #2
    Re: 12&quot;x12&quot; Fire Brick

    Those big high duty slabs are called refractory tile, and they are available from H-W and other refractory dealers. I looked at them, but they were
    WAY more expensive than firebrick, and I couldn't get the nice herringbone pattern that I wanted.
    My geodesic oven project: part 1, part 2


    • #3
      Re: 12&quot;x12&quot; Fire Brick

      I have never used one of these ovens and don't know if is it is better to have a cooking surface with fewer joints. Majority seem to use a herringbone brick pattern which seems to work. And I aggree looks good. I was wondering --after using the oven over time are the joints between the brick on the floor and dome still visible.



      • #4
        Re: 12&quot;x12&quot; Fire Brick

        I think that after time, what bothers you today, becomes a small issue tomorrow. And after a lot more time - you can blame it all on the imperfections of the material. In regard to joints, I think less would be better. If you have the $$$ to spend - go for it.

        Check out my pictures here:

        If at first you don't succeed... Skydiving isn't for you.


        • #5
          Re: 12&quot;x12&quot; Fire Brick

          We sell12"x12"x2" refractory tiles @ $15 each over here,42% al2o3. Very popular with the WFO guys.