web analytics
Getting started - or not? - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Getting started - or not?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Getting started - or not?

    We are seriously considering building a WF oven in Longwood, Fl. Seminole county. We bought the blocks for the foundation, the concrete to level the slab, and then did what we should have done first - called the county. A permit is required in Seminole county. My question is this: Has anyone done this in Seminole county and how difficult was it to work with the county? There are no specific outdoor kitchen codes, but there are codes regarding wind etc. We were thinking that a simple, hand drawn plan showing a concrete pour to level the existing concrete patio, reinforced, then a block corner unit foundation with poured cells would come under the code guidelines. Then additional structure plans as best we could from the Pompeii FB plans. Any thoughts?.. or is back to Home Depot with all of the supplies.
    Any help would be greatly appreciated. We really want to do this, but don't want to make it a 6 month long nightmare.