web analytics
insulating fire brick questions - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

insulating fire brick questions

  • Filter
  • Time
  • Show
Clear All
new posts

  • insulating fire brick questions

    I have the opportunity to purchase the following insulating fire brick for $1 each: BNZ fire brick From searching the forum, it seems like fire brick is considered the insulating equal to vermicrete. When I came across the brick for sale, I was hoping it would be a superior method of insulating the oven. Given the costs of the brick, does vermicrete have an advantage over the insulating fire brick? I haven't priced vermicrete, but I assume the price will be close to that of the brick. Seems like it would be easier to work with the brick for insulating under the floor. At this point, I am also considering insulating the dome and vent with the brick. Any disadvantage to this? Thanks for any opinions.


  • #2
    Re: insulating fire brick questions

    At that price, I would so go for it. Usually they are pretty expensive, but those specs (for the lowest density brick) are close to perlcrete/vermecrete.


    • #3
      Re: insulating fire brick questions

      Thanks. So, should I double up the thickness or just go with the 2.5" thickness of the brick? I plan to build a 42" Pompeii. Do you think 200 bricks will cover insulating the floor, dome and vent/chimney area? My rough guestimate is that should be plenty unless I need two layers.


      • #4
        Re: insulating fire brick questions

        The data sheet did not have sizes.


        • #5
          Re: insulating fire brick questions

          Yeah, should have specified. 2.5 x 4.5 x 8 Thanks.


          • #6
            Re: insulating fire brick questions

            I would double up on the floor (I wish I had) and use a combination of ceramic blanket and vermicrete on the dome. If you don't want to drop the cash on the blanket, you can always double the thickness of the vermicrete layer on the dome. It might be a pain in the butt to insulate the dome with brick. Just my .03 (I added a penny for experience).