web analytics
Vent arch construction - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Vent arch construction

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vent arch construction

    The brick arch that will cover my vent landing is 13.5 inches deep (long).

    Are there any concerns with construction requiring a span of more than one brick length? Should the joints be staggered the length of the arch as well as between the brick pieces?

    Do I build the interior arch first, let set and then complete the exterior section?

    I'm also incorporating an 8" round metal vent in the top of arch.

    Thanks:

  • #2
    Re: Vent arch construction

    No problem, just stagger the joints. It will be easier to build the inner then the outer, as a rule.

    Comment

    Working...
    X