web analytics
Gas burner assembly - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Gas burner assembly

  • Filter
  • Time
  • Show
Clear All
new posts

  • Gas burner assembly

    My township is saying I need gas burner for pizza oven unless it is more than 25ft from any combustible material ( in this case my house - 15ft) Anybody add a gas burner or have dealt with crazy building codes - yes you can have a wood burning fireplace in your house surrounded on 5 sides by combustible materials but if you move it outside then it has to be 25ft away from anything else ???

  • #2
    Added gas burner - pain in the ass. Haven't used it yet. Plan on making bread so maybe I'll use it to tune up oven temperature


    • #3
      Hello Coop, What did you use as the gas burner.. Cast?...... DIY?

      Best.... JD


      • #4
        Hello Larry

        Commercial burners come with flame detection devices so that the gas is cut off if the flame goes out. May even have an Oxygen sensor to check the atmosphere.
        Be careful with home brew systems.



        • #5
          This burner is designed for wood burning pizza ovens - it can be used by itself or not at all ( just wood). Can use natural gas or propane - just have to change gas nozzle. The burner mounts in a metal sleeve which comes up through the floor of the oven. It comes withma metal cap you put on when you are burning wood.To work it you first have to ignite the pilot flame and a thermo couple confirms pilot is indeed on - then dial up the main burner. Manufacturer also makes remote thermometers so you can mount them outside your oven - I used one to register the floor temperature and one to register dome temperature but Celsius. Google Avanzini