web analytics
Hearth insulation confusion......Help - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Hearth insulation confusion......Help

  • Filter
  • Time
  • Show
Clear All
new posts

  • Hearth insulation confusion......Help

    I have built a cast segmented oven which weighs over half a ton and intend to put it on a trailer. The hearth is 3" thick (as are the oven walls) I have built the frame in my trailer and the top layer so far is going to be marine ply. Now obviously I can't put the oven straight on the plywood (I persume given time it would burn) I was wondering if I made vermiculite cement (6-1) at 1" thick and also put 1" ceramic blanket under the hearth would it protect the plywood base? failing this I have a lot of house insulation (Kingspan here in the UK) It's basically dense foam woth aluminum paper on each side. I was thinking of usint this but I don't know how it will stand so much heat and weight over time... Any ideas or pointers, sorry but insulation board is not an option right now and i need to save as much weight as i can hence the 1" of vermiculite cement. Thank you

    My oven so far--- http://www.fornobravo.com/forum/f21/...day-16182.html

  • #2
    Re: Hearth insulation confusion......Help

    The insulation board is not very heavy and the blanket will crush under the weight of the floor.

    You will be able to carry much less wood if you insulate the floor well. And that would be a 2 inch layer of insul board.

    Just my two cents.



    • #3
      Re: Hearth insulation confusion......Help

      Don't use domestic insulation to insulate your oven. It will burn and stink, as it has organic binders.
      My geodesic oven project: part 1, part 2


      • #4
        Re: Hearth insulation confusion......Help

        Insulation board is so expensive here in the uk and it seems hard to find.any alternative suggestions.


        • #5
          Re: Hearth insulation confusion......Help

          Vermiculite/portland may not hold up with the road vibration. You really, really want to use board. You might email a few US places and see about having it shipped, but local board may be cheaper than that.

          Don't skimp on the floor insulation. This is the one area of your oven that you MUST do correctly the first time. Bite the bullet and get a 2-4 inches of board.
          Ken H. - Kentucky
          42" Pompeii

          Pompeii Oven Construction Video Updated!

          Oven Thread ... Enclosure Thread
          Cost Spreadsheet ... Picasa Web Album


          • #6
            Re: Hearth insulation confusion......Help

            That looks great, but I am wondering why you made it so big if you want to keep it portable.

            I suggest you keep this in your back yard and make another to fit on a trailer... which you would need to be braked double axle to prevent it tipping.

            This is the FB insulation board link
            as you see it is 3 to 4 times better than vermiculite so is much lighter and compact.
            You can get it for less than 80 quid from a refectory builder's yard. My local one has offcuts which I collect from time to time, no charge/beer money