web analytics
Soliciting feedback on metal stand for corner install - Forno Bravo Forum: The Wood-Fired Oven Community



I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Soliciting feedback on metal stand for corner install

  • Filter
  • Time
  • Show
Clear All
new posts

  • Soliciting feedback on metal stand for corner install

    Im planning for an outdoor corner install of a Casa2G90 stove. After much consideration of masonry vs. metal stand, I decided to try to design a metal stand. Im not a metalworker, though I am a woodworker with friends who weld. At least they are friends for now.

    So I put together a design and Im hoping to get some feedback from the forum. I know there are quite a few people out there who have built their own metal stands and Id appreciate any advice you might have.

    A few notes about the materials:
    • The uprights are 3x3 steel tube (1/4 thickness)
    • The rails are 2x2 steel tube (1/4 thickness)
    • The braces on the top are 1 x1 steel tube (1/8 thickness)
    This was also a chance for me to learn to use Google SketchUp for doing 3D renderings. For free softwareits pretty darn cool.

    Thanks for your help,