web analytics
Soliciting feedback on metal stand for corner install - Forno Bravo Forum: The Wood-Fired Oven Community



Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.

To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Soliciting feedback on metal stand for corner install

  • Filter
  • Time
  • Show
Clear All
new posts

  • Soliciting feedback on metal stand for corner install

    I’m planning for an outdoor corner install of a Casa2G90 stove. After much consideration of masonry vs. metal stand, I decided to try to design a metal stand. I’m not a metalworker, though I am a woodworker with friends who weld. At least they are friends for now.

    So I put together a design and I’m hoping to get some feedback from the forum. I know there are quite a few people out there who have built their own metal stands and I’d appreciate any advice you might have.

    A few notes about the materials:
    • The uprights are 3”x3” steel tube (1/4” thickness)
    • The rails are 2”x2” steel tube (1/4” thickness)
    • The braces on the top are 1 ¼ “x1 ¼” steel tube (1/8” thickness)
    This was also a chance for me to learn to use Google SketchUp for doing 3D renderings. For free software…it’s pretty darn cool.

    Thanks for your help,
    Attached Files