web analytics
Top slab support what can be used. - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Top slab support what can be used.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Top slab support what can be used.

    Hi everyone great site.
    I have decided to build a WFO and I'm in the process of getting most materials and equipment before I start.
    I'm thinking about what I can use for the support base for my stand slab. I see most use plywood (expensive in OZ) but I would like to know if using cement sheets will do or if anybody knows any negatives of using galvanised/zinc corrugated roofing sheets.
    Can MDF, fence palings (laid side by side) etc be used. I'm trying to keep costs down and don't want to spend $50 just on the support base. I realise if it's not done right it'll collapse before it sets due to the weight but with enough tempory support under what ever I use I'm thinking pretty much anything can be used.
    I've never built one before so just need to be warned whether I'll be right or not.

    Thanks.. Oscar

  • #2
    Re: Top slab support what can be used.

    If you are designing the slab to be self supporting IE: floating with re-bar on the cinder block. I would think that any nonporous flat material would work since it will not be used for a permanent support. Just make some temporary leg supports to hold up the plywood (or whatever material you decide) until the slab is dry. There are some good photos out there demonstrating how this is done.

    Comment


    • #3
      Re: Top slab support what can be used.

      You can use anything. If using palings or such and there are a lot of gaps, you can line it with poly prior to the pour.

      Think about how the form work has to come out after the concrete cures. This can be a real pain if done wrong. If using something like 2x4s to support it vertically, cut them a bit short and use wedges that can later be knocked out. If the main base is a single sheet, consider cutting it in half and supporting the seam.

      Comment


      • #4
        Re: Top slab support what can be used.

        Thanks the reply guys.

        This is a great idea

        If using something like 2x4s to support it vertically, cut them a bit short and use wedges that can later be knocked out

        Does the slab support need to be removed. It'll be hidden under the concrete. I was thinking that by having it sitting on the blocks it'll be so much easier to do. The concrete block I plan on using are going to be 190mm deep so if I sit the wood etc on it by 50mm I'll still have 150mm on physical concrete slab sitting on the concrete block walls. Are there any negatives it doing it this way. I realise over time wood might rot but that shouldn't be a problem with so much of the slab in contact with the blocks.
        Am I missing something by doing it this way.

        Comment


        • #5
          Re: Top slab support what can be used.

          Wives are pretty good to use as support in my experience.
          Kindled with zeal and fired with passion.

          Comment


          • #6
            Re: Top slab support what can be used.

            Originally posted by david s View Post
            Wives are pretty good to use as support in my experience.
            Mines not to happy about the whole WFO idea so if she keeps it up I'll try it.

            Comment


            • #7
              Re: Top slab support what can be used.

              Yeah, I built my under-slab form work out of shipping skids, and burned them afterwords.

              Why spend money on something you're just going to throw out anyway?
              My geodesic oven project: part 1, part 2

              Comment


              • #8
                Re: Top slab support what can be used.

                Ive seen corrugated iron used with good results.
                The English language was invented by people who couldnt spell.

                My Build.

                Books.

                Comment


                • #9
                  Re: Top slab support what can be used.

                  Cement board is perfect for the bottom of your structural slab form. You only need two 3x5-foot sheets. You don't even need to cut them (unlike plywood) if you're building a 42 inch oven. I ran a length of duct tape along the center joint to reduce leakage from the pour and put a brace right under the joint.

                  Comment


                  • #10
                    Re: Top slab support what can be used.

                    Thanks for all the replies. Looks like it's cement sheeting.
                    I love ebay somebody just listed a heap of offcuts for $2 buy now so how lucky was that.
                    Thanks azatty I read your post checked ebay and saw it.

                    Comment

                    Working...
                    X