web analytics
Pompei Oven CAD Drawings - Corner Installation - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Pompei Oven CAD Drawings - Corner Installation

  • Filter
  • Time
  • Show
Clear All
new posts

  • Pompei Oven CAD Drawings - Corner Installation

    On pages 17 and 18 of the Version 2.0 Pompei Oven Instructions, there are some CAD drawings for the hearth and oven in a corner installation. The largest shown is for a 49" outside diameter oven. To my way of thinking, if you have
    4.5" bricks on the opposite sides of the circle totaling 9", this drawing will yield an oven with a 40" diameter cooking surface. I assume that when FB refers to a 42" oven in their plans, they are talking about the cooking surface, which would require a 51" outside diameter and similarly increased hearth size. Is my thinking correct?

    If so, does anyone have a CAD drawing of a corner hearth and oven in this configuration that they would like to share?