If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Forum Issues Update
We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
As the portland breaks down from around 300C, this layer will presumably loose strength. However if the primary aim is for it to just add thermal mass, then no worries. Better to reduce the amount of portland and increase the proportion of lime, which is fireproof, although not as strong. If you want more strength then go for a refractory that contains calcium aluminate cement. This last option is the most expensive.