web analytics
Fire bricks Spec - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
See more
See less

Fire bricks Spec

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fire bricks Spec

    hi all,
    I found those Muddox fire bricks at my local masonry shop:
    Alumina: 27.1%
    Silica: 62.9%
    Density: 2.073 g/cm^3 (roughly 129.4 pounds/cubic foot)

    Am I good to go?
    Just for my information, are those considered as Low or Medium duty?

    thanks,
    Serge

  • #2
    Re: Fire bricks Spec

    Do you get a response how did the Muddox bricks work on your oven?

    Comment


    • #3
      Re: Fire bricks Spec

      The Muddox bricks are good. I used them for the oven.
      I have been using the oven for about 6 months and no issue so far.

      Comment


      • #4
        Re: Fire bricks Spec

        it is good to use fire brick with that specifications for your oven. it is close to high duty

        Comment


        • #5
          Re: Fire bricks Spec

          High duty is 45%>, these are low to medium duty as per the alumina content. They are high in Silica content so I hope you used a mask when cutting.
          Great for the use in ovens.

          Comment

          Working...
          X