web analytics
Spark arrestor screen - Forno Bravo Forum: The Wood-Fired Oven Community



New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Spark arrestor screen

  • Filter
  • Time
  • Show
Clear All
new posts

  • Spark arrestor screen

    Does anyone know of a source for spark arrestor screen? I can't find a cap to fit my clay flue. Looks like I will need to make a chimney cap. Thanks.

  • #2
    Re: Spark arrestor screen

    Just double up and off-set some 1/4" hardware cloth, bend the four edges at a 90* (around 2" ) then push it down until it sits flush with the top of the flue. Then cap as planned...all chimneys should be capped, not exceptions.
    Old World Stone & Garden

    Current WFO build - Dry Stone Base & Gothic Vault

    When we build, let us think that we build for ever.
    John Ruskin


    • #3
      Re: Spark arrestor screen

      Originally posted by stonecutter View Post
      Just double up and off-set some 1/4" hardware cloth
      Found some at a hardware store today. Looks like it should work.