web analytics
Can't find a door - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Can't find a door

  • Filter
  • Time
  • Show
Clear All
new posts

  • Can't find a door

    Is there any outlet for purchasing a door and frame? I have been looking but haven't found anything yet. Looks like I might have to have one made. That would be too expensive. Please help! Also, I saw at least one web site that described the construction of a dome oven with a wood door. I suppose that would work. Does anyone have any experience with wood doors?

    Thanks for the input.


  • #2
    Re: Can't find a door

    Hi John,

    I searched for oven doors and frames and OMG !! are they ever expensive. We're talking hundreds of dollars. The next best thing is to measure the oven and make a set of plans to take to a fabrication shop. You might also find a trade school where students will accept the project. You should decide on materials and details before finding a shop since it is likely the fabricator will not have knowledge of wfo's and their needs. He'll be able to do a credible job if you provide photos and examples, but don't expect him to design it for you.

    If you make a wood door then most people use thick oak planks and fashion a handle that doubles as a prop so the door doesn't fall out. You would normally soak the door in water and place it against a hot, empty, oven. When the oven is used for baking bread the wet wood adds moisture (steam) to help make crispy crust on the loaves. Do not place a wood door in an oven that has a live fire. Rake out the coals first.

    The thickness of the door can be 2" to 2 1/2". Avoid gluing planks together to make up the thickness and design the handle so that the screws that hold it in place are put in from the outside. You don't want extreme heat to transfer to the wood from screws or bolts placed on the inside face. A wooden door is rustic and functional and can last a long time if you care for it. If you are going to bake bread or other foods then there is no need to place the door when the temp is 900 deg. If you want to cook the next day with retained heat then, IMO, find something else to cover the entrance.


    Here is the link to my oven number 1 construction photos!

    Here is the link to my oven number 2 construction photos!


    • #3
      Re: Can't find a door

      Here's my door project. It works great!
      Ken H. - Kentucky
      42" Pompeii

      Pompeii Oven Construction Video Updated!

      Oven Thread ... Enclosure Thread
      Cost Spreadsheet ... Picasa Web Album


      • #4
        Re: Can't find a door

        Here's my door...Like Ken, I think it works great.

        Member WFO-AMB=WW