web analytics
Oven floor alternatives? - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Oven floor alternatives?

  • Filter
  • Time
  • Show
Clear All
new posts

  • Oven floor alternatives?

    We happen to already have 160 large, low quality red bricks and 90 concrete blocks here in the Andes two hours north of Quito and workers who have built bread ovens with like material (relatively low temp and high ceilings). I have not found fire bricks. They say that concrete mixed with crushed glass is what they use. Does that sound reasonable? I had thought we could get some clay with high alumina content instead.

    I was also casually wondering why a sheet of thick steel could not be used.

    Finally, is FB insulation fibreglass board or mineral wool? For insulation I had rather envisioned using the kind of panels used to insulate vehicle engines from the passenger compartment.

  • #2
    Re: Oven floor alternatives?

    Here's a new one: crushed glass as a aggregate for concrete. Although that might be neat for a concrete countertop where you're grinding it down to expose a decorative layer, you certainly don't want it on the inside of your oven. Portland based concretes break down at oven temperatures, particularly where they are exposed to direct flame.

    Ovens have been built successfully with plain red bricks. The harder the better: you want to choose bricks that break cleanly rather than crumble when hit with a hammer. You want to steer clear of bricks with holes in them.

    The insulation boards and blankets that we use are specific refractory products. Domestic insulation has organic binders that burn and stink at oven temperatures. If you can't get refractory specialties there, you can get vermiculite or perlite from garden suppliers and make an insulating concrete out of that.

    And I know you didn't ask this, but for anyone googling "oven crushed glass", broken glass is not an insulator.
    My geodesic oven project: part 1, part 2


    • #3
      Re: Oven floor alternatives?

      The broken glass as an insulator has been used by a number of builders, I think a lot in Greece or Turkey. Although glass is not an insulator if used on its own without any cement or sand, then it is the air spaces between the broken glass that become the insulator. Typically this layer is used under the floor bricks. A local restaurant in our city here has such an oven. The builder is Turkish and his oven is huge.
      Kindled with zeal and fired with passion.