web analytics
Cinderblock to cementboard transition - Forno Bravo Forum: The Wood-Fired Oven Community



Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Cinderblock to cementboard transition

  • Filter
  • Time
  • Show
Clear All
new posts

  • Cinderblock to cementboard transition


    I was wondering if anyone who has done the steel framing to box in the oven has had any problem with cracks in a stucco finish? Someone mentioned having the blocks go up to a certain point and then meeting the cement board will cause a crack along the joint.



  • #2
    Re: Cinderblock to cementboard transition


    I did exactly as you described and didn't have any problems with the transition. Make sure you tape the gap between the concrete blocks and cement board. Also, tape ALL cement board seams.

    A have a few small stucco cracks in the back of my enclosure where I didn't bother taping the seams (oops).

    Good luck!
    Ken H. - Kentucky
    42" Pompeii

    Pompeii Oven Construction Video Updated!

    Oven Thread ... Enclosure Thread
    Cost Spreadsheet ... Picasa Web Album


    • #3
      Re: Cinderblock to cementboard transition

      I did the same - no issues -

      I used fiberglass tape at the transistion of the two materials and then used fiber reinforced render to coat the two surfaces (surface bonding cement).

      On top of that I put a final coat of a flexible stucco and it's looking great in year two.

      My oven progress -


      • #4
        Re: Cinderblock to cementboard transition

        Thanks guys, that makes for a little less worrying on my part, just finished the framing and going to start snapping the hardibacker today.