web analytics
Can you frame the enclosure with wood? - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

Can you frame the enclosure with wood?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can you frame the enclosure with wood?

    If I cover my oven with the insulating blanket and have 7-11" clearance from the oven to the walls which will be filled withh vermiculite or perlite, Can I frame the walls with wood studs? I will attach durarock to that.

    Has anyone done it?

  • #2
    code

    Code requires two inches free air space between chimney (or fireplace) and combustibles. The exception to this is for wood mantle trim, which can directly adjoin the masonry if the masonry at that point has twelve inches or more thickness from the firebox.

    I would say, that if you are two inches away from your 4 inches of insulation, you should be fine with wood studding. If in doubt, use metal studding, which is cheaper anyway.
    My geodesic oven project: part 1, part 2

    Comment


    • #3
      metal cheaper?

      Thx DMUM..
      I must be looking at the wrong metal studs..
      I can get a 2X4 for $1.99 where a metal stud is $7-8. The size of the metal studs look to be 3-4" wide does that sound right?
      My choice is not based on on cost but rather ease of use.

      Right now I have my form for my hearth framed with 2X6. I could just leave those where they are and attach my concrete backer board to that along with a bottom stud and the studs for the walls.

      I doubt I would have space between my vermiculite and the studs because I was just going to build the enclosure and pour it in from the top to fill the space...

      Thx
      Mike

      Comment


      • #4
        There are various sizes of metal stud, and you can use the thinner ones for the upper enclosure. I would recommend that you go with the metal studs at least for the walls -- you could consider using wood for the roof joists. There is the possibility the enclosure walls could get warm and you really want your enclosure to last and look great for years to come.
        James
        Pizza Ovens
        Outdoor Fireplaces

        Comment


        • #5
          Originally posted by mrpbjnance
          I can get a 2X4 for $1.99 where a metal stud is $7-8. The size of the metal studs look to be 3-4" wide does that sound right?
          My choice is not based on on cost but rather ease of use.
          I stand corrected on the price, I haven't used/shopped for them.

          Wood is easier to work with, but metal may let you worry less.
          My geodesic oven project: part 1, part 2

          Comment


          • #6
            Wood

            This isn't a direct reply to the wood/metal question, but it is an approach that works. I enclosed the oven proper with 4 inch block then used standard brick for the facade. The top of this sandwich is capped with 2 x 8 wood plates, secured with J bolts. Above the vermiculite, with a four inch air gap, I built a steel stud frame, over which I laid cement board as a fire barrier. Then the wooden roof trusses were nailed to the plates, and a conventional roof was built. The "attic" does get warm, but only from the sun, and I used standard soffit vents in the eaves to lessen this.

            Any help?

            Jim
            "Made are tools, and born are hands"--William Blake, 1757-1827

            Comment


            • #7
              Thanks Jim,

              I was also considering that...

              Did you cement each block together or did you dry stack them and fill the cores like what is recommended for the stand?

              Comment


              • #8
                I did that exact design on my outdoor Scott oven. 4"x8"x16" blocks on top, each course mortared. Then, I did a wood joist and beam roof (just like a house) on top of that.

                The blocks are easy to work with. The downside is that they take a lot of space (8" side to side), and it is difficult to do anything other than straight walls. So if you have space, and just want straight walls (I put up decorative crowns), it's a good option.

                James
                Pizza Ovens
                Outdoor Fireplaces

                Comment


                • #9
                  Block

                  Did both. The blocks are mortared and the voids are filled, with a line of half inch rebar along the top course. I cut a groove all around the top course with a hand-held brick saw. Overkill, perhaps, but my oven is high mass.

                  Jim
                  "Made are tools, and born are hands"--William Blake, 1757-1827

                  Comment


                  • #10
                    Cheaper Steel Studs

                    Not sure where you are at but when I shopped around places like
                    Menards were like $5 per stud for 3 5/8. Which is about a 2x4x8.

                    Loews on the other hand had the same thing for 2.40 a stud. Same thing.

                    Then just buy your tracking in 10Ft pieces. Also 3 5/8.

                    Hope this helps... !

                    THE ACTOR!!!

                    Comment

                    Working...
                    X