If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
1 of 2<>
Hello, Forno Bravo Community Forum members.
As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.
We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:
The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.
Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.
We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.
Thank you for all of your patience and continued support.
I have all of that stuff, I'm a distributor, but I'm in Michigan. call Spec Building Materials, they are a roofing distributor, headquartered in Kansas City, branches from there to Texas...last number I had was 1-800-821-3204
You can also do the same search in google maps to get more local results. A more general "Roofing suppliers" might generate better leads. You really need a local supplier: this stuff is mostly too heavy to ship. If you do need to get a pallet load shipped, it's much more affordable to get it shipped to a local trucking depot, instead of a domestic liftgate delivery.
We used clay tiles on our oven roof. Our local roofing company normally stocks clay tiles but they were waiting to order a shipment and they were in no hurry to get it. We looked into ordering tiles online but everyone seems to have a minimum order of 100 field tiles and 25 for speciality tiles. It is possible to use just the fields and cut them with the wet saw to make the ridge caps/end finishers, gable rakes, etc. but drilling holes is a bear. One tile bit does only one tile and takes five minutes. You can of course mortar them in and forget about the drilling. Also, for a pizza oven you will want the short tiles for aesthetics. We ended up scrounging through the local yard and finding enough to get the job done and cutting up the fields where needed. If you can find the mission style half barrels, you can do everything with those. Very frustrating but worth it. Anyway, you can call Ludowici and explain your situation. They may have a dealer nearby or be willing to ship a small order. Ludowici Roof Tile - The World's Finest Clay Roof Tile