If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Forum Issues Update
We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
Re: corrugated roofing and chimney flashing question
If you cut the corrugated to within 1/4" or so you could just silicone caulk the chimney to it. It's nice if the panel seam runs through the opening, easy to layout and cut. If not just measure twice....
If you're lucky or layout the panels so you do have the seam splitting the pipe, also caulk that seam inside the overlap on the uphill side. It won't leak and you won't have ugly orange hi-temp boot to look at or pay for.