web analytics
Chimney Not Drawing Enough - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Photo Galleries are back! Instructions below.

Dear forum users,
Thank you for your patience with the Photo galleries. We've got your galleries online!
We have finished writing a custom script to migrate the PhotoPlog to vBulletin5’s albums.

Unfortunately V-Bulletin killed the "Photoplogs" in their software upgrade which was unforeseen and we're the first development group to have written a script for getting the galleries back... that said, it took some time to reverse engineer the code and get the albums to move over seamlessly!

Forum users will be able to access their “PhotoPlog” images through their user profile page by clicking on the “Media” tab.
They will also be able to browse other albums by going to the albums page. (On the forum site, there is a link in the black bar beside “Forums” to the albums.)

In order for users to create an album please follow the steps below.
1) Go to user profile page and click “Media”
2) Click Add Photos
3) Enter Photo Gallery Title in the first field
4) Click Upload or Select from Photo Album to add photos
5) Click Post
6) Once posted, the album will be created as a “Topic” on the albums page for the public to see. The topic title will be the “Photo Gallery Title” they created before uploading their photos.


To create this migration path we used vBulletin5’s default album structure. Unfortunately, it won’t work like the “PhotoPlog” but is an album/gallery component on the forum now.
See more
See less

Chimney Not Drawing Enough

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chimney Not Drawing Enough

    hi guys,

    just starting to use my barrel vault oven. I have gone through the curing fires with no real issues (some small cracks). my main concern is my chimney doesn't seem to draw enough of the smoke as it spills out the front arch.

    I have made my chimney just outside of the door/opening. Im thinking of cutting out a small hole (size of half a brick) at the front end of the dome just above the door and feeding it to the chimney. Im hoping this will also help my fire to breathe as it appears to be choked by the excess smoke in the dome.
    If i blast the fire with a hairdryer, it burns well, but soon after i move the dryer away it dies down again..

    i will try and post a few pics of my oven. i will appreciate any feedback ond or advice on my situation.

    EDIT: i also have a 3ft galvanized chimney flue which is detachable and is not in the pic
    Attached Files

  • #2
    Re: Chimney Not Drawing Enough

    Harrison
    from your picture, it is obvious that your chimney void and size is way too small for your oven size.
    Look at your opening closeup and you will see that the top 1/3 of the oven opening has smoke stain on it and all that smoke is expected to go up that little chimney hole.
    I have a 40" Pompeii with a a stainless void the full width of the door 24" x 15" and funnels 18" up to an 8" round flue. No smoke exits my front arch unless I use the petrol leaf blower to change it from an oven to a bast furnace.
    It should be easy to correct by cutting (or using numerous masonary drill holes through the bricks) and making the chimney entrance
    hole double the size.
    The fact that it is just an open hole and not a funnel shape, you will still get some, all be much less, smoke out of your front arch. I would also then make a plate to reduce the void size to fit your flue diameter but I would ensure that it was at least 8" or preferably larger. The larger your oven, the larger the chimney needs to be.

    Rastys
    If you don't succeed the first time, try again and again until you get it right!

    Comment


    • #3
      Re: Chimney Not Drawing Enough

      Harrison,

      I have a barrel vault oven as well. The method and size of opening are basically the same as what Rastys used. I get zero smoke out the front, and the chimney draws like a locomotive. Suggest you do a search of the photo gallery for vent and chimney work by members. Rastys is right on in what he recommeds. However, three feet of pipe is not enough;should be above four for the best draw. Don't go cutting holes in anything; just make the vent area larger and taper it upward to where the flue begins.

      Jim
      Last edited by CanuckJim; 07-22-2009, 03:38 AM.
      "Made are tools, and born are hands"--William Blake, 1757-1827

      Comment


      • #4
        Re: Chimney Not Drawing Enough

        Im thinking of cutting out a small hole (size of half a brick) at the front end of the dome just above the door and feeding it to the chimney.
        This is a really bad idea. You wouldn't have built a barrel vault oven if you didn't want to do retained heat cooking, and this vent will suck all the heat out of your oven.
        My geodesic oven project: part 1, part 2

        Comment


        • #5
          Re: Chimney Not Drawing Enough

          Absolutely don't go cutting anything. When we built the barrel vault in our back yard I made a similar mistake. The vent opening to our chimney there is about 5 inches deep by nine inches wide so it appears to be about the same area as yours. Other than that is appears that the oven is a similar shape. We get some smoke puffing out the front but mostly in the beginning of the fire. I think you could get by with increasing the height of the chimney. I do think that the detatchable thing could be creating a problem as well in the sense that without a really good seal your flue could be acting like a mixing valve sucking fresh air in at the crack and thus slowing down the flue gases on the way up.
          All the best!
          Dutch
          "Making the simple complicated is commonplace; making the complicated simple, awesomely simple, that's creativity. " Charles Mingus
          "Build at least two brick ovens...one to make all the mistakes on and the other to be just like you dreamed of!" Dutch

          Comment


          • #6
            Re: Chimney Not Drawing Enough

            thanks guys.. im going to try the longer flue first.. if thats a no go then im bringing out the angle grinder and widening the chimney to the width of the oven door..

            im hoping this chimney fix will also take care of the smoke buildup inside.. im already in trouble for using the mrs' hair dryer to blast the fire..

            Comment


            • #7
              Re: Chimney Not Drawing Enough

              Remember that even with a higher (longer) chimney (which should help a lot) it needs to heat up before it works properly. I suggest that you prime your flue gas stack by starting a small fire just below the flue gas exit before you start your main fire in the oven.

              Regards from Karl

              Comment


              • #8
                Re: Chimney Not Drawing Enough

                Keep it hot and make it 3X to 4X higher then it will draw like a factory.

                Comment

                Working...
                X