web analytics
my fire door - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

my fire door

  • Filter
  • Time
  • Show
Clear All
new posts

  • my fire door

    The oven is 95 percent done and I'm playing with some door ideas.
    Here is a simple 'fire' door I made out of thin aluminum. I wanted
    to keep heat in, but still allow adequate breathing. It also helps direct the smoke into the flue.

    The slat on the bottom is tall and wide enough to slide a pizza
    in. When the fire is going, you can actually see the fire breath in
    from the bottom.

    I have a tapered entry and the door just leans against the entry way.

    I'm also working on a 'insulated' door that is a double wall steel door stuffed with insulation, insulated handles and a thermometer. This will be my overnight heat retaining door.

    Thanks again for everyone advice. I have learned a great deal from these

    Attached Files

  • #2
    Re: my fire door


    This is an interesting door.

    Are you happy with the way it performs?

    What benefits do you get from this door? Is it allowing the oven to maintain higher heat?