web analytics
Vent Placement for Lintle opening - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

Forum Issues Update

We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
See more
See less

Vent Placement for Lintle opening

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vent Placement for Lintle opening

    How did people place the vent for the chimney when they had a lintle opening and a decorative arch? By that I mean did you do a row of arched bricks, an opening in the bricks, and then another row of bricks or did you leave an opening immediatly after the dome then start on the arch?

    Thanks!

  • #2
    Re: Vent Placement for Lintle opening

    Amber - I went with an arch, opening, then arch.

    Les...
    Attached Files
    Check out my pictures here:
    http://www.fornobravo.com/forum/f8/les-build-4207.html

    If at first you don't succeed... Skydiving isn't for you.

    Comment


    • #3
      Re: Vent Placement for Lintle opening

      God yours is good! Did you shim the chimney up around the sides, to keep it from moving?

      Comment


      • #4
        Re: Vent Placement for Lintle opening

        Amber - if you go to my thread (Les' Build), page 3 link #146. You can see what I did to support the chimney.

        Les...
        Check out my pictures here:
        http://www.fornobravo.com/forum/f8/les-build-4207.html

        If at first you don't succeed... Skydiving isn't for you.

        Comment


        • #5
          Re: Vent Placement for Lintle opening

          Wow, you are a master with the brick cutter!

          Comment


          • #6
            Re: Vent Placement for Lintle opening

            I built mine from the dome out towards the front. I left the bricks run long at the inner arch so they could key in with the outer arch. I then faced the outer arch with the decorative arch and let it hang down about 3/4 of an inch to encourage smoke to go up the chimney vs. out. It seems to work well.










            As you can clearly see - my brick cutting and cleanliness is not quite up to par with Les.

            Christo
            Last edited by christo; 12-03-2008, 12:13 PM.
            My oven progress -
            http://www.fornobravo.com/forum/f8/c...cina-1227.html
            sigpic

            Comment


            • #7
              Re: Vent Placement for Lintle opening

              Well, honestly, whose is? Looks great, though, and as long as the pizza tastes good! Thanks for the visuals.

              Comment


              • #8
                Re: Vent Placement for Lintle opening

                Also - you can't see from the pics. The inner arch bricks are notched so that they go under the dome arch and support it. I packed the tails of the inner arch bricks with refrax (refmix) so that I was sure the arch supported the dome opening.

                BTW - thanks for the kind words!

                Christo
                My oven progress -
                http://www.fornobravo.com/forum/f8/c...cina-1227.html
                sigpic

                Comment


                • #9
                  Re: Vent Placement for Lintle opening

                  Thanks that helps! Y'alls oven really does look sweet. I can't wait until ours is done. I really sit around and look at the pizza pictures in the forum and drool. Soon, soon....

                  Comment

                  Working...
                  X